I was becoming more and more intrigued to create prints from a carving. I had watched numerous videos on YouTube to learn about the techniques and methods that people used. I was hooked, and ordered my Speedball Linoleum Cutter.
I had some dense foam on hand that was used in some basic picture frames. It seemed that they were soon going to have a new purpose. My Speedball cutting tool arrived and I looked forward to cutting out my first print. Nope! Didn't work. The foam was a bit too dense. I had grown up with the adage of 'make do with what you got.' Well sometimes that works, and sometimes not. It was time to get something that I saw people have success with.
I placed another order for the Speedball print making blocks, called Speedy Carve. I figured since my first try didn't work, I wasn't going to go with a less expensive brand. I definitely wanted it to work. I ordered the Speedball Carving block.
The time came. I was going to make a real print. Something I actually dreamed about printing, and not just some little things to give it a try. I drew a picture of my cat, Tori, from a photo. She is gorgeous, no matter if I didn't draw every change in fur color!
The method I used was to first trace around my Speedy Carve block, so that I would have the appropriate dimension for my upcoming drawing.
With photo on my phone off to the side, I commenced to drawing, and shaded in the areas that I wanted to print, on my paper. The areas that you don't want to print, are the ones that get carved away.
I darkened my drawing with my pencil, and then laid it on the carving block, face side down. I used the smooth round side of a marker to rub over the back of my paper, to transfer the drawing to the block.
Cool, the image was easily transferred. As per tips from the videos that I watched, I went over my drawing on the block with a pen, as the pencil marks can easily get smeared away.
Then the carving began. I started with the smaller V shaped carving tool to carve right around the edges that I wanted to make my prints from. I used a larger V shape carving tool to carve out the larger areas. I even laid the large V carving tool on its side to cover more area. That worked pretty good.
Overall, the Speedball carving tool works really well, and glides smoothly along the surface of the Speedy Carve block. Per instructions from videos that I watched, I held the carving tool at an angle and with light pressure, pushed the tool along, away from my body, and my other hand.
I found that it helps to have good eyesight, good lighting, steady hands, and being able to see all the lines and areas that you want left intact. With a bit of a slip, part of what you want to print can easily go away. The black in one of the cat's eyes, was mistakenly made smaller, more like a slit when a cat is looking at a light. So guess what, the cat now has black slits instead of the wider eyed look. Oh well. She's still gorgeous!
I have since cut away the areas around the cat, and glued the carved block to a piece of wood. It gives me a solid piece to hold, and isn't wobbly or flexible.
I also found that I get a cleaner print when I press the carved block down into brayered paint that is smoothed out, rather than using the brayer to apply the paint directly to the carved block.
Hope you found some helpful tips here. If you want to try making prints yourself, I do recommend the Speedball Carving Took, along with the Speedball Speedy Carve.
Thank you for visiting and for your comments. My plan now is to fine tune my print making of this cute cat, and then design some products with the prints in my CherylsArt store on Zazzle. Let me know if you have a cat color request and or product type that is available on Zazzle. I will be glad to oblige.
Cheryl Paton
No comments:
Post a Comment